How do I connect Scala Rider Q2 to my phone?
Pick up one headset and simultaneously press and hold the CTRL Button and MC Button for at least six seconds until the Red Light begins flashing rapidly, indicating it is in Intercom Pairing mode. 4. Repeat Step 3 again for the second scala rider Q2 PRO headset. Both headsets should now be flashing rapidly in Red.
How do you use Cardo voice commands?
You hear a beep. If you are in DMC mode, you can only use unit buttons to activate a voice command. 2. Say the voice command loudly….Using Voice Commands.
| In Mode | To Perform The Action | Say |
|---|---|---|
| FM Radio | Jump backward to the previous preset station | “Previous Station” |
| A2DP Music | Stop/pause A2DP music streaming | “Music Off” |
Can Cardo mesh with Sena?
Once you’ve established this connection, on the Cardo Connect app, you can tap the “DMC” button – meaning Dynamic Mesh Connectivity – and bring your Sena headset into your Cardo mesh network that supports up to 16 riders. It’s worth noting that one Cardo headset can only bring in upto two Senas into your mesh network.
Is Scala Rider compatible with Sena?
Universal pairing Apparently Sena has a Universal Intercom function to allow this. Tried it out yesterday and it worked like a charm. The way it works is like this. Both units are set up in pairing mode and the Scala rider recognizes the Sena as a phone.
How do I connect my phone to Scala Rider?
Make sure Bluetooth is enabled on your phone/GPS/MP3 player.
- Check the scala rider is in Standby (single BLUE flash every 3 seconds).
- To pair Bluetooth Channel 1 – press “V+” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating.
Does Cardo have open mesh?
This is where the two systems diverge since the 50R allows you to either enter a full multi-channel open mesh intercom open to anyone, which allows you to really push the boundary of how many people you communicate with, the Cardo comes with a great feature that can bridge Bluetooth connections to the DMC Mesh.