Will any OBD scanner work on BMW?

Will any OBD scanner work on BMW?

Therefore, to keep the cost low, one would be better off buying a BMW specific OBD scanner, if it’s only gonna be used on BMWs. An OBD scanner for BMW will read the standard OBD error codes along with BMW proprietary codes. They are not expected to read codes from other manufacturers, though.

Which OBD2 Scanner is best for BMW?


  • FIXD OBD2 Pofessional. Easy-to-use OBD2 App & Car Code Reader.
  • LZLRUN INPA K+CAN K+DCAN. Cost-effective model.
  • Autel Maxidas DS808. Full suite of OBD2 scanning capabilities.
  • FOXWELL NT510 Automotive Scanner for BMW. Compact design.
  • MAOZUA Latest V7.7 Creator C310. Compact and portable design.

Does BMW use OBD2?

OBD stands for on-board diagnostics, and the current standard is OBD2. BMW began installing the 16-pin OBD2 socket in its vehicles from 1996. Prior to this, the OBD1 standard was used. OBD2 has been mandatory in vehicles with gasoline engines since 2001, and diesel-engined vehicles since 2004.

What is BMW ISTA?

The BMW ISTA/D is a current dealer-level diagnostic software commonly used for all E Series and F Series BMW vehicles. It replaces the older version DIS diagnostic software. The ISTA/D software can be used in diagnosing all BMW models but it can only program BMW F-/I-/G-/Mini/RR series cars and beyond.

What is ISTA for BMW?

ISTA/P stands for Integrated Service Technical Application/Programming. It is a dealer-level diagnostic software that replaced the older version SSS Progman programming software. ISTA/P is primarily used for processing all coded, programmed, and enable-dependent control modules of BMW vehicles.

How do I run a diagnostic on my BMW?

How to run a diagnostic on a BMW?

  1. Get inside your car and close all the doors.
  2. Turn on the ignition but not the engine.
  3. Press the start/stop button 3 times in quick succession.
  4. Hold down the odometer reset button on the dash until the Service menu appears.
  5. To reset it press and hold the odometer reset button.

What is BMW diagnostic software called?

The BMW ISTA/D, or also known as RHEINGOLD, is the current dealer-level diagnostic software used for all Exx and Fxx vehicles.

How much does ISTA cost?

ISTA Packaging Tests

ISTA 3A General simulation test for individually packaged products weighing 150 lbs. or less that are shipped through a parcel delivery system $1,150
ISTA 3E General simulation test for unitized loads of the same retail or institutional packaged-product $1195

Is BMW ISTA good?

Registered. It’s the genuine BMW software suite so is definitely worth having. It can do anything a dealership can. For an E-generation car, you need ISTA/D for diagnosis and ISTA/P for programming.

How can I read my BMW code without a scanner?

Press the odometer’s Trip and Reset buttons while turning the ignition key ON. After turning the key ON, release the odometer Reset and Trip buttons to check if the Diagnostic Trouble Code or DTC appears on the odometer display.

What is the best OBD2 scanner for BMW?

bmw2fast. I am looking for a good OBD2 scanner that can read BMW scan tools. I know you are going to say K+DCan/INAP.

  • AtoM-AnT
  • jeffokada
  • banglenot. Click to expand… Carly.
  • nicknice91303. Carly pro all the way.
  • pocholin. Hands down Carly.
  • rabbit188. Question: Can Carly be used with a laptop?
  • pocholin. Smart phone only.
  • Cornolio
  • AtoM-AnT. Click to expand…
  • What is the best scanner for BMW?

    iCarsoft BM II is another alternative that is a better scanner for BMW than most generic OBD2 scanners. It lets you read and clear fault codes from multiple BMW systems, including chassis and body modules. It can read and clear trouble codes from transmission, engine, ABS, and airbag systems.

    Where can one purchase an OBD scanner?

    Brand: When it comes to a product like a OBD2 scanner the quality of the brand is important.

  • On screen info: The quality of the on screen information determines how effectively you can make use of the OBD2 scanner.
  • Live feed: In some instances a live feed is the most helpful type of information that you need to figure out a problem.
  • What does an OBD2 scanner actually do?

    Online Programming,ECU Programming,

  • ABS,Misfires,Video Overlay,Battery Information,
  • Anti-brake Lock System,Video Relay,Air Bag Problems,and Key Coding.