How do I fix toner Error on Samsung printer?
Samsung Laser Printers – Toner Empty or Toner Exhausted or Replace Toner Error Message
- Remove the toner cartridge and shake it from side-to-side to redistribute the toner.
- If one of the Toner error messages still remains, the toner cartridge has been exhausted and needs to be replaced.
How do you reset a Samsung toner?
To solve this problem, you need to reset the cartridge.
- Purchase a reset fuse for your Samsung toner cartridge . The fuse is specific to the cartridge model.
- Hold the cartridge in your hands like you would while sliding it into the printer.
- Pull out the fuse from the fuse compartment of the cartridge.
How do I reset my Samsung printer?
How To Reset Factory Default Settings for Samsung Printers
- You have to press the keys in quick succession MENU # 1 9 3 4. The display will show TECH.
- Select the MENU key again followed by ENTER.
- Press the < key two times.
- Select ENTER.
- Press ENTER again.
- Exit from this mode by pressing MENU # 1 9 3 4 again.
Why is my Samsung printer flashing red?
If a corresponding LED is solid red, along with a blinking red status light, check the following: A small amount of toner might remain in the toner cartridge. A minor error might have occurred.
How do I reset my toner chip?
Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won’t harm the cartridge so do it anyway just to be safe. Done.
How do you fix a not compatible toner cartridge?
Ways to remove the error messages Remove your new cartridge and replace it with the old one. Leave your printer and go and do something else for 10 minutes. Replace the old cartridge with the new one again. These two steps alone often resolve the issue, so see if your printer now recognises your new cartridges.
How do I reset my toner?
With the printer powered on, open the toner access door. (You will see a ‘Cover is Open’ message on the LCD screen.) Press the ‘Clear/Back’ button to get to the ‘Reset Menu’ At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges.
How do you reset your printer settings?
How do I reset the printer settings to the default settings?
- Press the Menu/Set key on the control panel.
- Press up or down navigation key to select Printer and press Menu/Set.
- Press up or down navigation key to select Reset Printer and press Menu/Set.
- Press 1 to select “Yes”.
What does orange light mean on Samsung printer?
Orange. Blinking. Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for replacement.
How do I get my printer to accept compatible cartridges?
Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!
How do I reset my printer back to factory settings?
- Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
- Select “Setup” and then select “Printer Maintenance”
- Select “Restore” and then select “Restore Factory Defaults”
- A message appears stating that the factory defaults will be restored.
What happens when you reset a printer?
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language. To restore the product to the factory-default settings, follow these steps. Turn the product off.
https://www.youtube.com/watch?v=ouoqD5TZaJI