How often should you change water pump impeller?

How often should you change water pump impeller?

In most cases, you won’t need to replace the water pump unless the housing is damaged. Instead, replacing the water pump impeller every three years or sooner should avoid most water-pump-related issues and keep your outboard running in excellent condition.

How long does impeller pump last?

All impellers should be changed at a minimum of three years. Some will not make it that long depending on many things, how often it is used… too little and it will deform and tend to dry rot. Use it alot and it will wear out from spinning around in it’s housing.

What causes pump impeller to fail?

Damaged impellers can also lead to low flow in pumps. The top 3 most common causes for impeller failures are due to cavitation, erosion and corrosion.

What happens when an impeller fails?

If your impeller fails, the pump can’t pump cool water to the engine causing your engine to overheat. If you catch that your impeller is failing early on, you might avoid major problems. However, if you’re not fortunate enough to catch a bad impeller, the results can be catastrophic to your engine.

Do pump impellers wear out?

In extreme cases, when the impeller is completely worn, there will be no flow and hardly any power. But in many cases, tight clearance parts, such as wear rings and bushings, are the first to wear.

Why isn my outboard pumping water?

Turn the engine off and check for anything, such as weeds or trash, which may be blocking the water intake. If a foreign object is present, remove it and restart the engine after it has returned to normal temperature. In most outboard motors, the water output is a small tube-like structure that can easily get blocked.

What happens when a pump impeller wears?

To summarize: If an impeller wears out or gets plugged, flow drops, pressure drops, efficiency drops and power drops. Or in essence, everything drops. Keep up the good work, and keep on pumping!

How many hours does a boat impeller last?

You should check the impeller’s condition during Spring Commissioning and every 200 hours of operation. Correctly installed impellers may last for several years, but you should stick to a schedule of preventative instead of emergency maintenance.