What is the horsepower on a Honda 690?
Features
| GX630 | GX690 | |
|---|---|---|
| Net Power Output* | 20.8 hp (15.5 kW) @ 3,600 rpm | 22.1 hp (16.5 kW) @ 3,600 rpm |
| Net Torque | 35.6 lb-ft (48.3 Nm) @ 2,500 rpm | 35.6 lb-ft (48.3 Nm) @ 2,500 rpm |
| PTO Shaft Rotation | Counterclockwise (from PTO shaft side) | Counterclockwise (from PTO shaft side) |
| Compression Ratio | 9.3:1 | 9.3:1 |
What is the difference between a GX630 and GX690?
The power is a function of the “amount of torque” available during the rpm range – usually referred to as the “area under the (torque) curve. If both engines are limited to 2500rpm, then they may very well produce the same amount of HP, but gx690 produces more torque after 2500rpm than gx630 does.
What are Honda GX engines used for?
Honda GC Series engines are designed specifically for premium, high volume residential power equipment applications. Horizontal shaft models are ideal for a variety of consumer products, including pressure washers, water pumps, compressors, and portable generators.
What is the difference between Honda GX and GX engines?
[3] Having the on/off switch combined in to the throttle control (as with the GC motors) makes for simpler operation, but it has the drawback of not being able to run the fuel out of the carburetor….What is the difference between the Honda GX and GC series engines?
| GX-Series | GC-Series | |
|---|---|---|
| Fuel-Shutoff Valve [2] | Yes | No |
Where are Honda GX made?
Honda produces small engines at 5 production facilities worldwide. Our production capacity is well over 7 million units. Engines for the U.S. market are primarily sourced from the U.S., Japan, and Thailand.
How much oil does a GX690 take?
Includes a pre-filter, an air filter, two spark plugs, two quarts of engine oil, an oil filter, a fuel filter, STA-BIL fuel stabilizer and instructions.
How often should you change the oil in Honda GX690?
After the first month or 20 hours of operation – Change the oil. Every 6 months or 100 hours – Change the oil, clean the air filter and check the spark plug. Clean the spark arrester if your engine has one (GX 690 only.) Every 200 hours – Replace the oil filter.
How much oil does a Honda 690 take?
Are Honda GX engines any good?
The GX – OHV series is Honda’s commercial/industrial series of engines which is their top of the line engines which is often regarded as the best of the best available out there.