Does Catalina 25 have a swing keel?

Does Catalina 25 have a swing keel?

The Catalina 25 is a small recreational keelboat built predominantly of fiberglass with wood for structural support and trim. It has a masthead sloop rig, a transom-hung rudder, and a fixed fin keel, fixed winged keel, or swing keel.

What is a swing keel?

Swing keels are retractable keels that are hinged in the front and swing into a slot called a trunk. Sailors lift and lower the keel with a crank, pulley, or hydraulic system. Sailboats with swing keels can reduce their draft for shallow water sailing or to make them fit on a trailer.

Is the Catalina 22 Trailerable?

The Catalina 22 is an American trailerable sailboat that was designed by Frank V. Butler and first built in 1969. The Catalina 22 is one of the most produced boats in its size range and achieved an unparalleled commercial success.

How fast can a Catalina 25 sail?

Under power, the Catalina 25 will make about 5- 1/2 knots with a 6-hp. outboard, and you can coax an extra 1/2 to 3/4 knot or so out of the boat with an 8- hp. or 9.9-hp. engine. (Theoretical maximum hull speed in ideal conditions is around 6.3 knots.)

Are Catalina boats any good?

Conclusion. The distillation of her designer’s decades of boat design and building experience, the Catalina 425 is an excellent cruising boat that will carry you just about anywhere in comfort, safety and, yes, speed and style. She’s a worthy winner of a SAIL Best Boats award.

Can you trailer a Catalina 25?

Trailering the Catalina 25 Despite the fact that a bare Catalina 25 weighs approximately 4,150 lbs., the boat plus trailer, loaded for a weeks cruise, can easily weigh over 6,000 pounds.

Where are Catalina Yachts manufactured?

Built in America Every Catalina model is built in Florida now, a consolidation that’s been in the works for some time. In fact, all new Catalinas designed and built in the past ten years were built in Florida.

What is a Catalina 22 keel made of?

The swing keel, also chosen by 90% of the buyers, is cast iron and, when retracted, remains substantially exposed (accounting for more than half of the 2′ draft of the shoal draft model). It is a rough 550 lb.

Related Posts