How do I setup RAID 10?
- In the Drive Group Definition screen, press and hold Ctrl and select the related Drive Groups to span for the RAID 10 array.
- Click Next.
- Click Add to SPAN.
- Click Next.
- Click the RAID Level drop-down menu and select RAID 10.
Is RAID 10 setup for speed or redundancy?
RAID 10 utilizes both data striping and disk mirroring to achieve data redundancy and thus a high degree of fault tolerance.
Do you need a RAID controller for RAID 10?
To implement RAID 10, you need at least four physical hard drives. You also need a disk controller that supports RAID.
What strategy does RAID 10 use?
RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved.
How do I set my SATA configuration to RAID mode?
To Set the System BIOS and Configure Your Disks for Intel SATA or RAID
- Power on the system.
- Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.
- In the BIOS Utility dialog, select Advanced -> IDE Configuration.
- In the IDE Configuration menu, select Configure SATA as and press Enter.
How do I set up a RAID 10?
Re: raid 10 setup. You need to create two raid 1’s first then stripe them. In the perc bios, select ‘configure’ > ‘view/add config’ and enter. Use the arrow keys to navigate to the first drive you want in your R10, press space to select it, then space again on the next drive.
How do I set up a 2-disk raid?
Press enter. You should now have 2 sets of 2 disks. Press F10 to configure. A popup will show 2 boxes corresponding to the id’s of the 2 disk sets created., press space and the first box should show Span-1. Arrow key to the next box and press space to select it as Span-2. Then press F10 again to configure the raid.
How many drives for RAID 10?
Raid 10 is a total of four drives. Each pair spans, and then a mirror is built of the span (or vice versa depending on the controller card). Your best bet with 6 drives is to have a 4 drive raid 10 and then set the other two as hot spares so that if you lose any it will immediately swap in.