What is ball lock kegs?
Ball lock kegs use a ring of ball bearings to secure gas and liquid connections to the keg, while pin lock kegs use pins on the keg fittings to secure the gas and liquid line fittings to the kegs (two pins for gas-in, three pins for liquid-out).
Are ball lock or pin lock kegs better?
Ball lock kegs are a little leaner, but a little taller where pin locks are a little shorter, but a little wider. Ball lock keg connections use a ring of ball bearings to secure connections to keg posts while pin lock connections use a “tongue and groove” type set up to secure connections.
Are Pepsi kegs ball lock?
Pepsi landed on the Ball Lock style while Coke uses the Pin Lock style. Homebrewers have since re-purposed these as homebrew beer kegs.
How do you release pressure from a pin lock keg?
On a pin lock keg, just depress the gas poppet to relieve pressure (unless it is full to the top). +1 – if you really want one, AIH has complete lids for a reasonable price.
How do you lock a kegerator?
The easiest way to secure the beer in your kegerator is to install a slide faucet lock. A faucet lock slides over the spout of the tap system and locks the tap handle in place. Another tap beer system security option is a Kegerator door lock, these locks keep your kegerator mechanical systems secure.
What PSI should I carbonate my beer at?
Burst Carbonation To burst carbonate your homebrew, crank up your CO2 regulator to 30 psi for 24 hours. Then reduce down to normal serving pressure, which is around 12 psi to15 psi (depending on your beer line length and altitude). That should leave your beer 75% carbonated.
How does a ball lock valve work?
The ball locks or quick disconnects are “locked” onto their respective body connects by four metal balls that are mounted in the lower portion of the device’s shank in a manner that allows them to move in and out horizontally.
What is the most common keg coupler?
Also known as the American Sankey coupler, the D-type keg coupler is the most common on this side of the world. Used by the majority of North American beers, including Molson, Corona, Coors, Budweiser, Miller, PBR, Yuengling, and so many more.
Are ball lock and pin lock posts interchangeable?
Both Ball Lock and Pin Lock style lids are the same dimension and are interchangeable. You can use a Ball Lock Lid on a Pin Lock Keg and vice versa. A big difference are the PRV (pressure relief valve) functions between the two styles. Both have automatic safety PRV valves.
What is a Pepsi style keg?
Kegconnection offers this 5 Gallon Ball Lock, Soda Keg (Pepsi style). This keg has been cleaned and soaked in a hot “Brew Clean” solution, re-rinsed, lubed and re-pressurized to check the seals. The kegs are in good shape, but could have small dings, dents or scratches. These will not effect the function of the kegs.
How do you bleed a pin lock keg?
Re: Pin lock kegs and pressure bleed valves Probably the easiest, no-extra-anything needed method is to simply connect the gas to it’s post at lowish psi (4-5psi) while keeping the lid slightly cracked. The gas will flow and be released out the cracked lid.
How do you use a keg lock?
Simply insert the key into the lock, and turn the key counter-clockwise until the lock bar is as low as it can go. Start turning key clockwise until the lock bar pushes tight against the faucet collar nut and cannot go any further.