How do I login to ilom?

Table of Contents

How to Log In to the ILOM Web Interface Using an Ethernet Connection

To log in, type the IP address of node’s ILOM in to your web browser. The web interface Login page appears.
Type your user name and password. Tip – The default ILOM administrator account user name is root and the password is changeme.
Click Log In.

How do I get back to ilom from console?

To switch back to Oracle ILOM, type ESC ( (the Esc key followed by ( ).

How do I open the console in ilom?

How To Access the System Console Remotely Using the ILOM CLI

Establish an SSH connection using the following command, and then enter the default password (changeme) when you are prompted:
To power on the system, type the command: start /SYS.
To start the system console, type: start /SP/console.

What is an ilom?

Integrated Lights Out Manager (ILOM) 2.0 is the system management firmware you can use to monitor, manage, and configure a variety of Sun server platforms.

How do you send a break from ilom?

To Use Ilom Set /Host Send_Break_Action=Break, Start /Sp/Console Commands, Or Break Key – Sun Oracle Netra T5440 Administration Manual. command prompt using the stop /SYS command. pressing the Break key.

Where is ilom IP address in Linux?

How to Display the ILOM IP Address Using the Web Interface

Type your user name and password.
Click Log In.
Select the blade and node to view from the left pane.
Make a note of the node’s SP IP address.
Repeat Step 4 to find the IP address for the server’s other node SP.

What is ilom in Solaris?

How do I get out of ilom console?

To exit the system console and return to the ILOM CLI, press Esc-Shift-9.

What is ilom used for?

ILOM enables you to actively manage and monitor the server independently of the operating system state, providing you with a reliable Lights Out Management (LOM) system. With ILOM, you can proactively: Learn about hardware errors and faults as they occur. Remotely control the power state of your server.

How do I find my ilom IP on Solaris?

How do I find my ilom IP address?

How can I change my IP address in ilom?

To set a static IP address for the ILOM using the CLI and a serial line connection, do the following.

Establish a serial connection to the ILOM.
Log in to the ILOM.
Type the following command to set the working directory.
Type the following commands to specify a static Ethernet configuration.
Log out of the ILOM.

How restart ilom Solaris server?

Reset the Server Using Oracle ILOM

From the web interface: In the left pane, click Host Management → Power Control, and select Reset from the Select Action list box. Click Save, and then click OK. The server resets.
From the CLI: Type the following command: -> reset /System. When prompted, type y to confirm:

How do I login to ilom?