How do I get my Brother printer to stop saying replace toner?

How do I get my Brother printer to stop saying replace toner?

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

What is toner life end?

The message ‘Toner Life End’ indicates the toner cartridge has reached the end of its expected life. To clear the ‘Toner Life End’ message, install a brand new, out of the box toner cartridge. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.

Why does my Brother printer keep saying no toner?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit.

How can I extend my Brother toner life?

To enable or disable Continue Mode, follow the steps below:

1. Press the Up or Down arrow key to choose General Setup, and then press OK.
2. Press the Up or Down arrow key to choose Replace Toner, and then press OK.
3. Press the Up or Down arrow key to choose Continue or Stop. Press Go.

How do you reset toner on MFC?

How to Reset Toner Low Message on Brother MFC-7340

1. With your printer ON, open the front door (cover)
2. Press Clear/Back Button once.
3. Press *00 (*zero zero)
4. The message on the display should now read Accepted.
5. Close the front cover.
6. Your toner is now reset.

How do I bypass Brother toner low?

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your Brother toner cartridge.

How does Brother printer know toner is low?

The message TONER LOW appears on the display when one of the toner cartridges is running low on toner, but the cartridge has not reached its end of life. This is just an alert that the toner cartridge will reach its end of life in the near future.