What are 1/2 sockets used for?

What are 1/2 sockets used for?

1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up. A 1/2″ drive socket can apply enough force to undo all nuts on a car. There are also 3/4″ and 1″ ratchets but these are used on trucks, tanks and industrial machinery.

What size is a 1/2 socket?

Metric / Standard Wrench Conversion Chart

What is the outside diameter of a 1/2 socket?

Impact 1/2″ Drive Deep Well Sockets Features:

What is the difference between 1 2 and 3/8 socket set?

Indeed, 3/8-inch impact wrenches generally deliver 90 to 100 ft/lbs of maximum torque, whereas 1/2-inch impact wrenches often offer at least 300 ft/lbs of maximum torque. That’s a big difference right there. So, 1/2-inch impact wrenches are considerably better suited (i.e., working on stubborn bolts).

What is a 1/2 inch socket in MM?

Convert between US Inches and metric mm wrench and spanner sizes.

What are the standard size sockets?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

How are sockets sized?

Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets. Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters.

Are 6 or 12 point sockets better?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

What are the 2 main types of sockets?

Sockets come in two basic types—connection-oriented and connectionless. These terms refer to types of protocols.

What is the most common socket size?

The most commonly used types are 8 mm, 10 mm and 14 mm sockets.

What is the most common socket drive size?

Drive Size

• ½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar.
• ⅜-inch drive size sockets are the most common and most available.
• ¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.

What is standard socket size?

What is the metric equivalent to 1 2 inch?

12.70 mm
Conversion table inches to mm

What socket is bigger than 1/2 inch?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21)

Why do 12 point sockets exist?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.