How do you get a stuck hub off?

How do you get a stuck hub off?

If that does not loosen it, there are some other techniques you can use to remove a stuck wheel hub.

1. Remove the Wheel Hub with a Slide Hammer.
2. Tighten the Bolt on the Backside of the Hub with Pressure from the Two Puller Bolts.
3. Chisel the Ears on the Hub Body.
4. Heat the Mating Area with a Torch and Tighten the Puller Bolts.

Are there any Ford Explorer recalls?

Ford is recalling nearly 253,000 Explorer SUVs from the 2020-2022 model years including hybrid, plug-in hybrid, and ST versions, rear-wheel-drive models with a 2.3-liter engine, as well as models built specifically for police use.

How do you remove a wheel hub from a knuckle?

Hub Unit Bearing Removal

1. Raise vehicle and remove lug nuts and wheel.
2. Remove the brake caliper and rotor.
3. Remove the axle nut, using an axle nut socket.
4. Before removing hub unit, make a note of the proper orientation and positioning of the sensor wire and bearing.
5. Remove the steering knuckle attachment bolts.

Which way does the hub nut turn?

The threads are not unusual; turn counter-clockwise to loosen them. The trick is to get yourself a piece of cast iron pipe.

What years of Ford Explorers are being recalled?

Why is the Ford Explorer being recalled?

New York (CNN) Up to a quarter million Ford Explorers are being recalled due to a mechanical problem that can cause the SUV to roll away while it’s parked, according to documents from the National Highway Traffic Safety Administration.

Do I need to replace the hub assembly or just the bearing?

Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.

What tool do I need to remove a wheel bearing?

What Tools Do I Need To Replace A Wheel Bearing?

1. A set of needle-nosed pliers.
2. ratchet wrench with various sized sockets.
3. flat-head screwdriver.
4. jack.
5. star wrench for loosening nuts on the wheel.