What does replace Fuser mean on Brother printer?

What does replace Fuser mean on Brother printer?

The message ‘Replace Fuser’ will appear on the display when the machine has printed approximately 100,000 pages (letter/A4 size single sided pages). The fuser unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams.

How long does a brother fuser last?

The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.

How do I reset the fuser on my printer?

Reset Fuser

1. Press the [Machine Status] button on the Control Panel.
2. Select the [Supplies] tab on the Touch Screen.
3. Select the [Fuser] button.
4. Select the [Reset Counter] button and then the [Yes] button to reset the Fuser.
5. Select the [Close] button to return to the default (Copy) screen.

How do you change the fuser on a unit Brother?

Follow the steps below:

1. Press the Power button to turn off the printer.
2. Open the Top Cover.
3. Unscrew the two long screws as shown to release the Fusing unit from the printer.
4. Remove the Fusing Unit from the printer by holding the handles on both sides.
5. Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.

How do you fix a fuser error on a Xerox printer?

Power Off the Printer, Unplug the Power Cord, Wait One Minute, Plug the Power Cord Back in, and Then Power On the Printer. 2. Replace the Fuser Assembly*. If the problem persists, contact Support for additional assistance.

How long should a printer fuser last?

Fusers are designed for fairly long lives compared to toner cartridges, but they don’t usually last forever. Most fusers last between 50,000 and 200,000 pages depending on the design. Little cheap printers tend to have short fuser lives. Fusers used in “workgroup” printers tend to be long lasting and easily replaced.

How do you fix a fuser error?

Solution one: Reset the printer

1. Press the Power button to turn off the printer.
2. Disconnect the power cord from the rear of the printer.
3. Wait 30 seconds, and then reconnect the power cord.
4. Press the Power button to turn on the printer. Wait for the product to start.
5. Try printing again.

How do you change the rollers on a Brother printer?

Replace Roller

1. Open the Top Cover (1) then the Front Cover (2) by pulling the Cover Release Lever (3) toward you.
2. Press the tab on each side of the Pick-up roller cover toward the center of the cover (1) and then pull the cover down.
3. Slide the Pick-up Roller (1) all the way to the right.

How do you know when a fuser is bad?

Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.

What does a Xerox fuser do?

A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.