How do I configure RAID HP ProLiant?

How do I configure RAID HP ProLiant?

Details

1. Power On the HP ProLiant MicroServer, when prompted, hit the F10 key to enter the ROM-based setup utility (RBSU).
2. Goto the Advanced tab and then choose IDE configuration hit Enter.
3. Highlight the SATA Controller Mode selection and hit Enter.
4. Choose RAID from the drop-down list.

How do I create a RAID on my HP server?

HP EliteDesk and ProDesk PCs – Configuring RAID 1 with SATA RAID Controller

1. Step 1: Prepare your computer. Prepare your computer before configuring the hard drives for RAID 1.
2. Step 2: Update the BIOS. Install the latest BIOS version.
3. Step 3: Setting the BIOS for configuring RAID 1.
4. Step 4: Creating a RAID 1 volume.

How do I disable HP RAID?

Disable the RAID feature from the system BIOS. Once located, scroll down the list options using the directional arrows on the computer keyboard and highlight the RAID configuration menu option. Select “disable” and press the enter key on your keyboard. Then press the “esc” key to return to the main menu. Exit the BIOS.

How do I check my RAID settings?

To view the RAID status, go to System Settings > RAID Management. The RAID Management pane displays the RAID level, status, and disk space usage. It also shows the status, size, and model of each disk in the RAID array.

How do I get to HP Array Configuration Utility?

Open the browser on the remote server. The System Management Home Page opens. 3. Click Array Configuration Utility on the left-hand side of the screen.

How do I get to RAID configuration utility?

Viewing the BIOS-Based Event Log

1. Start the BIOS RAID Configuration utility. See To Start the BIOS RAID Configuration Utility.
2. Select the HBA you want, then press Enter.
3. When the BIOS RAID Configuration utility menu is displayed, then press Ctrl+P.
4. Select Controller Log Information, then press Enter.

How do I remove RAID configuration from my hard drive?

How to delete RAID array with CTRL + i

1. Turn on the computer.
2. Use the up or down arrow keys to select “Delete RAID” Volume.
3. Use the up or down arrow keys to select the RAID volume.
4. Press Delete to delete the volume.
5. Press Y to confirm the deletion.

How do I find RAID settings in Windows?

Checking RAID from command line

1. Go to System Settings.
2. Click CLI Console.
3. Type the command diagnose system raid status and press Enter.
4. The following information is shown in the output: Mega RAID – this output shows that the device uses hardware RAID. Software RAID – this output shows that the device uses software RAID.

How do I access array configuration utility?

To access ACU, use one of the following methods:

1. If an optional controller is not installed, press F10 during boot.
2. If an optional controller is installed, when the system recognizes the controller during POST, press F5.

How do I access HP Smart array configuration Utility?