How do I sync my AcuRite thermometer?
Synchronize the units:
- Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
- Change A-B-C switch on both units to a new matching A-B-C channel then press and hold the reset button on the display for 20 seconds.
How do I calibrate my AcuRite wireless thermometer?
My AcuRite® App: How to set the reading calibration of a sensor
- From the tab/navigation bar, select. (Settings menu).
- Select Manage Devices.
- Select the name of the device the sensor is linked to.
- Select the sensor and set your desired Adjustments.
- Select Save to update.
How often does AcuRite thermometer update?
The high and low temperature records are automatically cleared every 24 hours. The high and low records clear each day at the time the batteries were installed. For example, if the batteries were installed at 6:00pm, then high/low records will reset at 6:00pm daily.
How do I set my AcuRite?
- 1 INSTALL SENSOR BATTERIES. In the outdoor sensor battery compartment, install four AA alkaline or lithium* batteries.
- 2 PLUG IN DISPLAY AND CONFIGURE.
- 3 MOUNT SENSOR. Find a suitable place outdoors to mount the AcuRite Iris.
- 2 ACCESS WI-FI SETUP PAGE.
- 3 ADD YOUR WI-FI CREDENTIALS.
- 4 SET UP YOUR MY ACURITE ACCOUNT.
How do I connect my AcuRite to the app?
My AcuRite® app: How to add a Connection Device
- From the tab/navigation bar, tap. (Settings menu).
- Select Manage Devices.
- Select Add Device.
- You are guided through a 4-step wizard – select Next to continue through each step.
How do you reset an AcuRite thermometer?
Hard Reset:
- Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
- Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button on the display for 20 seconds if applicable.