What do you put in a PhosBan reactor?
Add about 1 cup of water to the reactor. Use a yardstick or tongs to push out the large air bubbles trapped in the lower sponge. 1a. Adding PhosBan media Before adding PhosBan to the reactor, temporarily cover the top of the 9 inch center tube with a piece of tape.
What media do phosphate reactors use?
The first component of a phosphate reactor is a small reverse flow media reactor chamber. The reactor is filled with what is called granular ferric oxide (GFO) media.
What does a reactor do in a saltwater tank?
In marine and reef aquariums, a calcium reactor creates a balance of alkalinity. An acidic solution is produced by injecting carbon dioxide into a chamber with salt water and calcium rich media. The carbon dioxide lowers the pH by producing a solution high in carbonic acid, and dissolves calcium.
How often should you change phosphate remover?
Change GFO when phosphate levels begin to rise. This is generally every 4 weeks for standard GFO and closer to 8 weeks for High Capacity GFO.
What reactors do I need for a reef tank?
Calcium Reactors are one of the most important pieces of equipment when it comes to keeping a successful reef tank.
How much Gfo should I use?
So how much should you use? We generally recommend starting with ½ cup for every 50 gallons of aquarium water and no more than a ½ cup for every 25 gallons of water. (e.g. For a 100 gallon aquarium, this would mean starting with 1 cup.)
How do you use PhosGuard in a reactor?
You can use PhosGuard two ways: Passively in a media bag in the sump or back chambers or in a reactor. When using any phosphate control media, using less is better than using more. Removing phosphates rapidly can shock the system and cause sensitive corals like SPS to lose flesh.
How do you use PhosGuard?
DIRECTIONS: Use 85 mL (⅓ cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. For best results, PhosGuard should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow.
How do I get rid of phosphates in my reef tank?
There are four main ways to help lower the Phosphate level in your aquarium:
- Water Changes & Vacuuming of Sand Bed (Detritus Removal)
- A Good Protein Skimmer.
- Macro-Algae in a Refugium or Turf Algae Scrubber.
- Chemical Absorption Products.
How does Gfo remove phosphates?
How Does GFO Work? GFO works by the process of adsorption, by which phosphate, silicate and other chemicals adhere to the surface of the media. Adsorption is a different process from absorption, in which a substance diffuses into a liquid or solid to form a solution.
Do you need a reactor for reef tank?
Calcium Reactors are one of the most important pieces of equipment when it comes to keeping a successful reef tank. While at first it appears that these are a rather costly investment, most of the time we see customers spend more on additives over the course of a year rather than purchasing a reactor.
Can you use too much PhosGuard?
It is entirely possible to overdose activated phosphate absorption medias in the aquarium, and PhosGuard™ is no exception. If phosphate-absorbing medias are overused, they can lower the phosphate so suddenly that sensitive aquatic organisms like corals and invertebrates can become stressed.
How do I lower phosphate levels in my reef tank?
What does a Biopellet reactor do?
The pellets are made of a biodegradable polymer. As the polymer breaks down, carbon is slowly released for the bacteria. This stimulates the nitrate-removing bacteria to do their job. The reactor allows you to control the water flow through the biopellets, safely maximizing the nitrate removal in your aquarium.
Should you run Gfo all the time?
Every time you notice high phosphates and replace your used up GFO with fresh media, you will spike down the nutrient level- instability. If you dont need it, I wouldn’t suggest using it consistently.
How fast will Gfo reduce phosphates?
BRS High-Capacity GFO: High-density, long-lasting, lower-maintenance phosphate removal. (16 tbsp = 1 cup). After 4-8 weeks the aquarium will have adjusted to the low nutrient level and the amount of GFO can be increased up to 2 tablespoons per 8 gallons of water.