Is a straight axle better?
Solid axles give more articulation and lifts tend to be less expensive than IFS. IFS gives a smoother ride, better handling, and better control at speed than a solid axle. Guys who do a lot of very technical crawling tend to favor solid axles for their articulation and simplicity.
What year Toyota had straight axle?
1986
In 1986, Toyota changed its front suspension in this country from a solid-axle leaf-spring design to the independent torsion bar (IFS) design called Hi-Trac. The year 1986 was also the first for the new 3.0L 150hp V-6 engine. In other parts of the world, Toyota continued to sell its pickups with straight front axles.
How much does a solid axle swap cost?
The process generally costs around $2500-$3000, depending on how involved the engineer needs to be throughout. However, it’s a vital component to ensure the vehicle is legal and safely built.
Why is solid axle better than ifs?
A solid axle has less moving parts and is easier to service, with no crossmembers clogging everything up. I also don’t like that the centersection in many new IFS rigs is made of aluminum. Solid-axle centersections are typically cast iron, which is more durable.
What Toyotas had solid axles?
Toyota used a solid front axle in the ’79-’85 pickups and 4Runners. All of these axles were 55.5 inches wide from wheel mounting surface (WMS) to wheel mounting surface and came with solid front disc brakes and closed knuckles with Birfields.
Is it hard to do a solid axle swap?
Now, a solid axle swap is not exactly an easy feat. But for those with the right skill set or will to learn, it’s definitely doable. Despite the old Toyota IFS being a great system, it lacks wheel travel and articulation. That’s why this serious off-roader opted for a solid axle swap.
How hard is it to do an axle swap?
Registered. Swapping one set of JK axles for another is easy. Put the whole frame on jack stands, disconnect the axle side of the control arms, pull the brake calipers off the axle, pull the ABS sensors, and pull the drive shafts and it’s out. Swapping in the other one is just as easy.
Can you rock crawl with ifs?
Sure, an IFS rig can be built to work in the big rocks, but cost and simplicity tend to keep the solid axle alive when it comes to rockcrawling.
When did they stop making the 22re engine?
The 2-valve SOHC 2.4 L (2,366 cc) 22R was produced from 1981 through 1997.
What are the strongest Toyota axles?
RCV Ultimate 30 Spline Axle Set with 300M Inner Axle for Toyota Pickup and 4Runner – STRONGEST – 300M INNER AXLE AND STAR. These are the strongest axles you can buy, with 300M inners and a 300M star. These are the strongest Birfield axleshafts you can get for your Toyota pickup or 4Runner.
What axles are in a 85 Toyota pickup?
What is a straight axle conversion?
A solid axle conversion is the process of removing the independent suspension of a vehicle and replacing it with a solid or single-piece axle and replacing the related suspension components that are used with the axle. This can be completed on the rear or front suspension of a vehicle.
How can you tell the difference between a Dana 30 and a 44?
The only difference between the JK Dana 30 and Dana 44 is ring gear size, electronic locker, and bigger shafts. (even if she insists shaft size doesn’t matter…) You’re better off just starting with an aftermarket Dana 44 that is a “true 44”.