What lights should be flashing on eir modem?
The LAN light (if using the yellow LAN port) should be GREEN and blinking.
How do I setup my Eircom modem?
To connect your device using an Ethernet cable, do the following:
- Connect one end of the Ethernet cable to Ethernet port on your device (usually on the side or rear of the device)
- Connect the other end of the Ethernet cable to one of the four Ethernet connections on the rear of the eir modem.
How do I change my eir modem password?
If you are availing of our eir Fibre service
- Open your browser, type 192.168.
- The username required is admin.
- The password is the same as your WiFi key (printed on the back of your modem router).
- The option to change your WiFi password will usually be located on the homepage when you login or in your network settings.
How do I reset my eir broadband?
If you want to reset the factory settings for eir fibre box, press and hold the RESET button with a pin (like a paper clip) for 8 to 10 seconds until all the modem lights turn off, then release. Alternatively, you can perform a reset using the software interface.
Should the internet light on my modem be blinking?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
Should the WIFI light be blinking on router?
As long as the Wi-Fi device is able to receive and send data over its wireless connection to the router, the blinking light can be ignored. The router’s lights blink when the device sends and receives data transmissions, indicating the data has been properly processed and sent to either the Wi-Fi device or the modem.
How do I know if my eir modem is working?
Solutions
- Check the basics. Check your modem is turned on and you can see a solid DSL light and blinking internet light.
- Check all connections are secure. If you have extra equipment such as a filter, unplug these and connect your modem directly to the left-hand side of the telephone socket.
Should the WiFi light be blinking on router?
How do I log into my eir modem?
In the address bar, enter http://192.168.1.254 and press Enter.
- Under User, enter admin.
- Under Password, enter your password.
- Choose LOG-IN. Note: the default username is admin and the password is the same as the WiFi password which can be found on the sticker on the back of the eir fibre box.
How do I find my Eircom net password?
Scroll to the bottom of the Settings page and click Show Advanced Settings. Scroll down to Passwords and Forms and you’ll see a link to Manage Passwords. Clicking this link will give you a list of saved passwords and clicking on any link will reveal the password.
How do I fix my eir modem?
Restart your modem and follow step 1-5 below:
- Turn off the modem using the On/Off switch.
- Unplug the power source on your modem.
- Wait 30 seconds and plug it back in.
- Wait 2 minutes for your modem to restart.
- The DSL light should be solid and the internet light should be flashing.
What does it mean when all the lights are flashing on my router?
Flashing lights is a good sign. It means data is travelling through your connection into your device. If there are no lights, or they appear static in a “on” capacity, try restarting your router to see if this may improve your connection.
What is the default password for eir router?
Note: the default username is admin and the password is the same as the WiFi password which can be found on the sticker on the back of the eir fibre box.
How do I connect my phone to my eir modem?
Instead of plugging your phone into the phone socket on the wall, plug your phone into either the “Phone 1” or “Phone 2” port at the back of your eir Fibre modem. These are the two grey ports that are adjacent to the grey DSL port at the back of your modem, as illustrated below.
What is eir network security key?
To ensure that no unauthorized person can use your wireless network, the eir fibre box comes with a default security key (10-digit secret number). Only the computers and devices that have registered with this security key will have access to your wireless network.
What do blinking lights on my modem mean?