How much horsepower can you get out of a 5.7 350?
The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370.
What are the torque specs on a small block Chevy?
Always torque bolts in three equal increments
| Bolts or Parts | Lube or Sealer | Torque to: |
|---|---|---|
| 7/16 Outer Main Caps (4 bolt) | Engine Oil | 65 ft-lbs. |
| 3/8 Outer Main Caps (4 bolt) | Engine Oil | 40 ft-lbs. |
| 3/8 Connecting Rod | Engine Oil | 45 ft-lbs. |
| 11/32 Connecting Rod | Engine Oil | 45 ft-lbs. |
How much torque does a 350 small-block have?
380 lb-ft
Like the 302, it was based on the 327 block, but the 350 had an all-new crankshaft with a 3.48-inch stroke. The first version, dubbed the L-48, produced 295 horsepower and 380 lb-ft of torque. The 350 became available in the Nova in 1968 and in its third year it was optional across the Chevrolet passenger car line.
Are flywheel bolts torque to yield?
All of the documentation that I found indicated the flywheel bolts are torque to yield, and not reusable.
How much ring end gap is too much?
061 end gap in that portion of the cylinder and be within recommended manufacturing tolerance. For this reason, Hastings recommends a MAXIMUM of . 003″ wear per inch of cylinder diameter, not to exceed . 012″ in any case for successful reringing.
Can I reuse Flexplate bolts?
I talked to a transmission specialist and he said the steel flexplate or flywheel bolts can be used 3 times max. The aluminum versions are one use only.
Can I reuse ARP flywheel bolts?
The stock bolts stretch during installation so they’re not reusable – this set of bolts is not only reusable but actually costs about half as much as a new set of Toyota bolts.
How high can a Chevy 350 rev?
Basic 350s won’t rev beyond 5500 due to induction and exhaust limitations, but they should be reliable to 6000 as long as you don’t run them out of oil.