Why is my LG front load washer not spinning?
A broken drive belt is one of the most common part failures that results in an LG front load washer not spinning. The drive belt is suspended around the wash tub via two pulleys, using power from the washer’s motor to spin the wash tub. Over time, this rubber belt can tear and break, leaving the tub unable to spin.
How do I fix the spin cycle on my LG washer?
Your LG washer keeps not spinning or skipping rinse because of a loose or broken drive belt. To fix this, you must have the belt tightened or replaced and reset the washer. The washer may also not spin if its door isn’t shut properly due to an overloaded washer or a broken door latch.
Why is my washer not going through the spin cycle?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
How do I put my LG washer in diagnostic mode?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer.
How do I reset my LG Tromm washer?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do you reset a Tromm washing machine?
How do I run a diagnostic on my LG front load washer?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
How do you know if your washing machine drum is broken?
Is Your Washing Machine Broken?
- Washing machine makes loud banging noises.
- Washing machine will not drain.
- Washing machine is leaking water.
- Washing machine drum isn’t turning.
- Washing machine door remains locked.
- Washing machine is tripping breakers.