Why is my VTech cordless phone not working?
If your telephone is not operating normally, disconnect the battery(s) from the handset and disconnect power from the base. After a few minutes, connect power to the base, install the battery(s) and cradle the handset in the base to allow it to establish a link. You can now try using your phone again.
How do you program a VTech phone?
Pick up the VTech cordless phone from the base. When the handset is not in use, press the “Prog” button, which will access the programmable directory. Using this directory, you can store up to 20 contacts and enter names that are up to 14 characters long, change the date and time and set your ringer.
How do you change the ringer on a VTech cordless phone?
You can change the handset ringer tone. Press MENU/SELECT when the handset is not in use. Press CID or until the screen displays Ringers, then press MENU/SELECT. Press CID or until the screen displays Ringer tone, then press MENU/SELECT.
How do I reset my VTech answering machine?
Hardware Reset:
- Plug the AC adapter into the device and allow it to boot up completely.
- Within 5 minutes of the device booting up, enter ***3332858#.
- The Message Waiting indicator will flash if entered successfully, and the device will factory reset.
How do you turn on the answering machine on a VTech phone?
First, set up the answering machine that came with your VTech phone. Then, press the ‘Answer On/Off’ button at the bottom of the main phone. Then, press the ‘Setup’ button and use the up/down arrows to navigate to set the number of rings before the answering machine receives the call.
Why is there no dial tone on my cordless phone?
If you have no dial tone on your cordless phone, check the battery and charge it if it’s low. Make sure your cordless phone’s base unit is plugged into a working electrical outlet. Also make sure the phone cord is plugged securely into the wall phone jack.
How do I change how many times my phone rings?
The default ring time before wireless voice mail picks up is 22 seconds. To change the ring time on your cell phone: On your phone’s keypad, dial (or tap): * * 61 * 13065206245 * * number of seconds #…Changing the number of rings before wireless voice mail picks up.
| Ring time | Number of rings |
|---|---|
| 20 seconds | 4 or 5 |
| 30 seconds | 5 or 6 |
How do I silence my landline phone?
Tap the “Mute” button on your land line phone after you dial in to the call. Tap the “Mute” button again to unmute when you want to speak. Dial “_6” (Star 6) to mute your land line on many conference call services, if your phone does not have a “Mute” button. Dial “_6” again to unmute.