How high should the strings be at the nut?
The top of the nut is shaped to follow the radius of the fretboard, and the string slots also follow this curve. To allow the strings to clear the top of the first fret, the bottoms of the slots should be . 030″ higher than the fret height.
How far should the bridge be from the nut?
On pretty much every guitar the bridge should be located so that the break point of the string will be exactly at the distance of the scale length, from the nut. The scale length of any guitar is defined as double the distance from the nut to the 12th fret.
How high should the strings be at the nut on an acoustic guitar?
High strings at the nut can cause sharp intonation and make playing in first position difficult, while low or worn slots can result in open-string fret buzz. Generally, the bottoms of the nut slots should be a few thousandths of an inch higher than the tops of the frets when the neck is straight.
How high should the string be off the first fret?
String Height at the 1st Fret
| Low Action | “Normal” Action |
|---|---|
| Low E: 0.51mm (0.020”) High E: 0.30mm (0.012”) | Low E: 0.76mm (0.030”) High E: 0.41mm (0.016”) |
What is the exact nut to saddle distance on the guitar?
Locating the saddle slot on steel-string acoustic guitars. The distance from the nut to the saddle is approximately twice the distance from the nut to the 12th fret.
How do you measure the height of a nut slot?
You can measure the nut slot heights by placing a feeler gauge in between the bottom of the string and the top of the first fret when the guitar is up to pitch and after the neck and bridge are adjusted.
How high should strings be above the frets?
Measuring at the 12th fret (as in the photo), the action height should be 2.6 mm for Steel String Acoustic guitar, 1.8 for electric, 2.0mm for bass and 3mm for a Classical.
How do you measure string spacing on a nut?
As we just learned, the string spacing is measured from the center-to-center of the two outside strings on your guitar. On the other hand, Nut width refers to the total width of a guitar’s nut from one edge to the other.
How do I know if my guitar bridge is too high?
If your guitar’s intonation is out or the guitar feels awkward to play compared to other guitars, the action may be too high. High action can throw off your guitar’s intonation because you need to push the string further to reach the fret. The distance you push the string causes the note to bend out-of-tune.
What is bridge string spacing?
The distance between the strings of a guitar, bass, or other stringed instrument, usually specified as measured at the bridge, though the strings are also obviously spaced apart at the nut as well.