What is GCOR in railroad?
The General Code of Operating Rules (GCOR) is a set of operating rules for railroads in the United States. The GCOR is used by Class I railroads west of Chicago, most of the Class II railroads, and many Short-line railroads.
Who uses GCOR?
At present, most Class I railroads in the U.S. use one of two “standard” rulebooks: the Northeast Operating Rules Advisory Committee (NORAC) rulebook and the General Code of Operating Rules (GCOR). Conrail, Amtrak, and several commuter and short line railroads in the northeastern United States use the NORAC rulebook.
Do not walk between railroad cars engines or equipment unless the opening is at least?
o Always be on the alert for moving equipment. Employees must always expect movement on any track, at any time, in either direction. o Do not step or walk on the top of the rail, frog, switches, guardrails, or other track components. equipment, leave at least 25 (8 M) feet between yourself and the end of the equipment.
Do train conductors have guns?
Don’t count on train conductors making up time Each section of a track has its own speed limit, and just like on the road with cars, there are patrollers with radar guns to make sure the crew is obeying all the rules.
Who is responsible for ensuring the work plan is carried out according to the job briefing or that it is modified when conditions change?
All employees
Each person is carrying out the assigned responsibilities. 3. Any hidden hazards have been identified and action initiated to eliminate or what precautions are required. All employees are responsible to see that the work plan is carried out according to the Job Briefing or modified when conditions change.
Are tracks with track centers spaced less than 25 feet apart?
Adjacent tracks mean two or more tracks with track centers spaced less than 25 feet apart. Anchorage means a secure point of attachment for lifelines, lanyards or deceleration devices that is independent of the means of supporting or suspending the employee.
How close can I work to a railway line?
What is a position of safety? at least 2 meters (six foot six inches) from the running line for trains going between 101 and 125 miles per hour.
How do train engineers use the bathroom?
Other than a refrigerator/watercooler and a bathroom there are almost zero ammenities on a locomotive. Only way a engineer can go to bathroom is by stopping his train or if the conductor is a certified engineer he could run for while.
Does OSHA require a Pre Task Plan?
An employee who’s working alone is not required to conduct a job briefing. Even so, OSHA states that the employer must make sure tasks are planned out, just “as if” a briefing had been required. A supervisor should brief the employee on hazards, work procedures, and safety measures.
How often does OSHA require safety meetings?
OSHA requires that all businesses, no matter how large or small, have regularly scheduled safety or safety committee meetings. A business with 10 or fewer employees may have a safety committee, while a larger business must have safety meetings. These meetings must be held on a monthly or quarterly basis.
What is the cardinal rule of railroading?
The Cardinal Rule of Railroading: Always expect a train or equipment to move on any track in any direction at any time!
What is the working limits in railroad?
Working Limits are defined as a segment of track with definite boundaries upon which trains may move only as authorized by the Roadway Worker having control over that segment of track.
What are the health and safety requirements when working on track?
Wear the appropriate PPE (personal protective equipment). This includes safety boots, a hard hat (white or blue) and orange high visibility clothing. You may not wear yellow, red or green clothing or hard hat because these colours are used for signals on the railway. Know the speed and direction of trains.
How far away must you and equipment be from overhead line equipment?
6 feet 6 inches
Lightweight tools and equipment must be left at least 2 metres (6 feet 6 inches) from the line, irrespective of the speed limit. An authorised walking route provides safe access to or from a place of work. These are often found near depots, stations and signalboxes.
Why do train engineers sit on the right?
The practice of the engineer being on the right side of the cab relative to the designated front of the locomotive dates back to the early days of the industry. It was done to give the engineer a better view of lineside signals.
How many pre task meetings should be done?
Since tasks will vary in duration, it is possible for a team to have only one pre-task planning meeting on one day but to have four or five such meetings on another day. The team discusses the work to be performed and the hazards that are likely to be encountered.