How do you get to the drain pump on a Whirlpool Duet washer?
Pull the bottom of the access panel toward you and pull it down to release it from the washer. The drain pump is under the Duet washer drum and has two hoses.
How do you remove the bottom panel on a Whirlpool Duet washer?
Grab the ends of the Whirlpool Duet lower access panel and lift the panel straight up. Pull the lower part of the panel away from the washer and remove it completely.
Does the Whirlpool Duet washer have a filter?
The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months. If the lint is not removed, it can cycle back through the washing machine and stick to laundry.
How do you clean sludge out of a washing machine drain?
Salt and hot water work well to remove laundry detergent soap-clogged narrow pipes. Pour ½ cup of salt down the slow-moving drain. Next, bring 2 liters of water to a boil; then carefully and slowly pour the hot water down the drain. Follow with a hot water flush.
Why is my Whirlpool Duet Steam washer not draining?
You need to make sure that the drain hose is not kinked at all. Straighten the hose to make sure that there is enough water flow and that you also remove any blockages from the drainpipe well. Ensure that you are using a U-shaped drain and secure it properly. Your instruction manual will show you how to do this.
How do you clean a Whirlpool washing machine drain?
Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Repeat this procedure if necessary until all the water has drained.
Does a Whirlpool Duet washer have a filter?
A Whirlpool Duet Washer is a front-loading, energy-efficient washing machine. The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months.
Where is the drain filter on a Whirlpool front load washer?
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. Remove the drawer by releasing the tab on each side. With your finger, push down on tab on right side of drawer, and up on tab on left side of drawer.