How wide are stock TJ axles?
At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.
How wide are Dana 60 axles?
The 84.74-inch-wide axle (an F-350 front axle is 69.8 inches wide) was designed for the ’05-and newer F-450 and F-550 Super Dutys, where it’s rated to support 7,000 pounds of gross axle weight (GAWR) and cope with more than 600 lb-ft of engine torque.
How wide is a Chevy Dana 60?
Differences between the front Dana 60s:
| OEM | Years | width (wms-wms) |
|---|---|---|
| Chevy | 79-87 | 69.5″ |
| 88-91 | 69.5″ | |
| Dodge | 79-91 | 67.5″ |
| 92-93 | 67.5″ |
How wide are Jeep Wrangler axles?
This assembled axle is the stock JK width (65.5 inches), comes with a 35-spline ARB Air Locker and 5.38:1 gears.
How wide is a TJ Jeep?
Jeep Wrangler (TJ)
| Jeep Wrangler TJ | |
|---|---|
| Dimensions | |
| Wheelbase | 93.4 in (2,370 mm) standard 103.4 in (2,630 mm) LWB |
| Length | 1996–99: 151.2 in (3,840 mm) 1999–2003: 155.4 in (3,947 mm) 2004–06 SWB: 154.9 in (3,934 mm) 2004–06 LWB: 171 in (4,343 mm) |
| Width | 1996–2003, 2004–06 LWB: 68.3 in (1,730 mm) 2004–06 SWB: 66.7 in (1,690 mm) |
How wide is a Jeep Wrangler TJ?
Jeep Wrangler (TJ)
| Jeep Wrangler TJ | |
|---|---|
| Width | 1996–2003, 2004–06 LWB: 68.3 in (1,730 mm) 2004–06 SWB: 66.7 in (1,690 mm) |
| Height | 1996–99: 70.2 in (1,780 mm) 1999–2001: 71.1 in (1,810 mm) 2002–03 & 2004–06 LWB: 70.9 in (1,800 mm) 2004–06 SWB: 71.2 in (1,810 mm) |
| Curb weight | 3,092–3,857 lb (1,403–1,750 kg) |
| Chronology |
What axles come in Jeep TJ?
What Axles Do I Have in My Jeep? Identifying the axles in YJs is pretty simple since there were no options for it. Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model.
How much weight can a Dana 60 handle?
Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs.
Will a JK Dana 44 fit in a TJ?
Registered. -JK axles are 65.5″ WMS, TJ axles are 60.5″ so if you plan on running a JK front and TJ rear then it wont work. Not even spacers will get you close to the desired rear width.