What are the 6 wires on a trailer plug?

What are the 6 wires on a trailer plug?

The color code for wiring harnesses can vary between industries, but the general standard for 6-way plugs is as follows:

  1. Green: Right turn/brake light.
  2. Yellow: Left turn/brake light.
  3. Brown: Tail/running lights.
  4. White: Ground wire.
  5. Blue: Brake controller output.
  6. Red or Black: Battery hot lead.

Is there an 8 pin trailer connector?

The 8-pin wiring design matches industry-standard 8-way flat plugs and is commonly used on boat trailers and trailers with surge brakes.

Why does my trailer have 8 wires?

The fact that you have 8 wires could mean that you have 2 running light wires, one for each side of the trailer, so you don’t have to run a jumper wire from one side of the trailer to the other.

How do you wire a 6 wire plug?

Hook the black wire coming from the main breaker panel around the black or copper “Line” terminal. Use the top terminal on an unmarked outlet. Tighten the terminal screw to hold the wire. Hook the remaining black wire around the black or copper “Load” terminal or the bottom terminal on an unmarked outlet.

Can you use a 7 way plug with 6 wires?

Expert Reply: You can certainly add a 7-way trailer connector to your trailer with 6 wires.

How do I add a 6-pin power supply?

Locate the 6–pin auxiliary power supply cable with the connector labeled To GFX Card or Splitter and release the cable from the cable retainer. If the splitter cable is attached to the connector, remove and retain the splitter. Attach the 6–pin connector on the adapter cable to the 6–pin power supply cable.

What is a 6-pin connector called?

The terms “PCI Express cables” or “PEG cables” (for PCI Express Graphics) are sometimes used to describe a 6-pin 12V power connector.

What does TM mean on trailer plug?

NOTE: Identify contacts by looking into the open end of plug or socket.

Plug Color Description
LT YELLOW Left Turn Signal
RT GREEN Right Turn Signal
TM BROWN Tail Lights
CENTER RED Charge Line

Related Posts