Popular questions

How do I fix error oxc0000225?

By pleasefireme

How do I fix error oxc0000225?

Follow the below steps to hopefully fix the issue, no matter the cause.

  1. Step 0: Create a Windows 10 Install Disk.
  2. Step 1: Run Through Windows Automatic Repair.
  3. Step 2: Run Manual SFC and Check Disk Scans.
  4. Step 3: Rebuild the BCD.
  5. Step 4: Set Your Active Partition.
  6. Step 5: Check for Faulty Hardware.

How do I fix Windows error 0xc00000e?

How to Fix Error Code 0xc00000e in Windows 10

  1. Use the Windows Automatic Repair Tool.
  2. Rebuild the BCD file and the Master Boot Record.
  3. Reset the BIOS to its default settings.
  4. Check and change the CMOS battery.

What is error code 0xc0000017?

Error code 0xc0000017 is normally attributed to bad memory sections that was marked by Windows built in Boot Configuration Data which block the use of Random Access Memory (RAM) as a temporary store for data.

What is error 0xc0000098?

0xc0000098 is a BSOD error code that may appear after cloning OS or upgrading to Windows 10. This error code is caused by two issues: The BCD has no entry, which may be caused by disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

What is error code oxc0000225?

First off, error code: 0xc0000225 means Windows cannot find the System Files used for booting, aka, BCD (Boot Configuration Data). In other words, if your system files are corrupted, the disk file system has a bad configuration, or if you have faulty hardware, the 0xc0000225 error would occur.

How do I reset my BCD?

To do this, please follow the steps below.

  1. Press F8 during your computer’s startup (before starting Windows).
  2. Select the operating system you want to repair, click next.
  3. In the system recovery options, click “Command Prompt”.
  4. Type at the prompt, Bootrec / RebuildBcd, and then press enter.

What causes error code 0xc00000e?

If you are faced with the error code 0xc00000e, then it could be because of such factors as a drive configuration that is incorrect or due to hardware failure. It could also be because your operating system cannot locate its boot location or the winload.exe file is corrupt and therefore, inaccessible.

What causes 0xc000000e?

One of the most common causes of this error is the BCD that became either missing, corrupt, or misconfigured. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

How do I fix registry file is missing or corrupt?

If the Windows System Registry file is missing or contains errors, enable the Recovery Environment, and run Startup Repair. Additionally, use System Restore and repair your Master Boot Record using Command Prompt. If the issue persists, reset your computer. As a last resort, clean install Windows.

What is error code 0xc00000e9?

Windows* error code 0xc00000e9 is a common Windows Boot Manager* error that indicates either a hardware failure or a corrupted system file encountered during the boot process. It appears shortly after the computer starts, but before the Windows login screen, as follows: An unexpected I/O error has occurred.

How do I fix error 0xc0000098 on Windows 8?

0xc0000098 – Fix for Windows XP, Vista, 7, 8, 10

  1. 2.1 Fix #1: Rebuild BCD via Easy Recovery Essentials.
  2. 2.2 Fix #2: Run Startup Repair.
  3. 2.3 Fix #3: Rebuild the BCD manually.
  4. 2.4 Fix #4: Run sfc utility.
  5. 2.5 Fix #5: Check your disk with CHKDSK utility.

How do I fix a corrupted BCD file?

How do I fix corrupt BCD on Windows 10?

  1. Rebuild the BCD. 1.1. Create a bootable drive.
  2. Reset Windows. Press the Windows Key + S and type in Recovery options. In the following Window, select Get Started.
  3. Perform a System Restore. Press the Windows Key + S and type in System Restore, then click on Open.

Where is boot BCD located?

Where is the BCD file in Windows 10? It is stored in a file in folder “\Boot”. The full path to this file is “[active partition]\Boot\BCD”. For UEFI boot, the BCD file is located at /EFI/Microsoft/Boot/BCD on the EFI System Partition.

How do I fix error 0xc00000e on Windows 8?

Windows 8 boot problem with error 0xc000000e “The boot configuration data for your PC is missing or contains errors”

  1. Insert your Windows installation disc and restart your computer.
  2. Choose your language settings, and then click “Next.”
  3. Click “Repair your computer.”

How do I fix error code 0xc0000034?

Fix 0xc0000034 in Windows 10

  1. Insert the Windows 10 DVD/USB and reboot your system.
  2. Boot from the media.
  3. Click Repair your computer at the Install now screen.
  4. Select Troubleshoot.
  5. Select Automatic Repair.
  6. Follow the wizard instructions to complete the process.

How do I restore my registry?

Restoring the Windows registry backup

  1. Open the Windows Registry Editor by doing either of the following:
  2. Click File > Import.
  3. Select the directory where the registry backup will be imported (e.g. desktop) and select the registry backup.
  4. Click Open.
  5. Restart your computer to begin using the restored registry.

How do I fix error 0xc00000e9 in Windows 8?

Fixing Error Code ‘0xc00000e9’

  1. Turn on your Windows PC.
  2. Press ‘Windows+X’ and then click ‘Computer Management’
  3. Click ‘Device Manager’ and then expand ‘Disk Drives’
  4. Right click on the affected disk drive and choose ‘Properties’
  5. Go to ‘Driver’ tab and note the driver version.