How do I know if my lid switch washer is bad?
You will need to remove the two-wire harnesses off the lid switch, While you can unmount the lid switch, at this point you only need to test it with a multimeter. Set your multimeter to the lowest ohms of resistance and test your lid switch. If it does not read any continuity, then your lid switch is indeed faulty.
What year is a Kenmore 70 Series washer?
The second letter indicates the year the appliance was made. For example, the F in the 80 series washing machine serial number CF4227224 indicates the machine was manufactured in 1996. The L in the serial number CL2636932 for a 70 series washer indicates the machine was made in 2001.
Will a washer work without a lid switch?
NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open. If you will open the top up, you should see the lid switch, and you should see the electric wires attached to it.
What size washing machine is a Kenmore 70 series?
Size. The Kenmore 70 Series Washer has a width of 27 3/4-inches and a height of 43 1/8-inches. The drum width is 27 1/8-inches. The washer weighs roughly 190 pounds, and the dryer specifically weighs 135 pounds.
How do I reset the lid lock on my washing machine?
If your lid lock light is flashing, you can unplug your washer for 10 minutes and plug it back in to reset the washer and the flashing light. You can also press and hold the ‘End of Cycle’ button for 20 seconds to reset the washer and flashing lid lock light.
How much does it cost to replace a lid switch on a washer?
Washer Lid Switch Repair Cost Repairing the lid switch costs $140 to $190. In some instances, this repair might only take 15 to 20 minutes so your bill might swing towards the lower number.
How old is my Kenmore 70 series washer?
Serial Numbers The second letter indicates the year the appliance was made. For example, the F in the 80 series washing machine serial number CF4227224 indicates the machine was manufactured in 1996. The L in the serial number CL2636932 for a 70 series washer indicates the machine was made in 2001.
Can you bypass a washer lid switch?
However, some washing machines come with a lid lock. This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.