What does dL mean on Whirlpool Cabrio?
Door Lock Failure
Cabrio Washer Fault Codes
| Fault Code | Washer Problem |
|---|---|
| dL (F80, 82, 84, 85) | Door Lock Failure |
| DU (F83) | Door Unlock Failure |
| F1 (F60-68) | Primary Control Failure |
| F2 (F2) | Keypad/User Interface Failure |
What does dL stand for on a Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
How do you clear a Whirlpool washer code?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does Ld mean on Cabrio washer?
– long drain
If Ld (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water.
How dO I fix the dL error on my LG refrigerator?
A dL error code displays when the door motor does not move to maximum position or home position within 5 seconds. Unfortunately, there are no troubleshooting steps for this error code. The unit will require a repair service, please visit our Request a Repair page.
Is there a reset button on Whirlpool washer?
Follow these steps to reset a Whirlpool washing machine: Make sure the power to the washer is turned on at the wall, but keep the Power button on the control off. Hold the Program button down while simultaneously pressing the Water Level button two times. When done correctly, the control panel lights should illuminate.
How dO you clear a Whirlpool washer code?
How dO you reset a Whirlpool washing machine?
Follow these steps to reset your Whirlpool washer:
- Turn the washing machine off using the control panel.
- Unplug the washing machine.
- Wait three minutes.
- Plug the washer back in, and wait thirty seconds before turning the washer on.
How do I fix my Whirlpool Cabrio LD washer?
If Ld (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
How do you clear the error code on a Whirlpool top load washer?
Press START/PAUSE once to clear the code, then press START/PAUSE again to restart washer. If the code doesn’t clear, Contact Us or Schedule Service Online.
What does dL mean on Maytag washer?
Maytag F/dL – Door Lock Error A Door Lock Error occurs if the door cannot be unlocked. It will try to lock it 6 times before displaying the error.