Where is flexiteek made?
Flexiteek products are manufactured in the UK and Sweden.
Can you sand flexiteek?
Can you re-sand it? Flexiteek 2G can be re-sanded by hand using 40 to 80 grit sanding paper and working in the direction of the grain. The rougher the sandpaper, the deeper the grain will be.
How do you clean a flexiteek deck?
STAIN/SPILL REMOVAL Flexiteek is stain resistant and most spills will clean up with warm soapy water (for rapid stain removal, clean while stain is fresh). We recommend the use of a Flexiteek Cleaner; simply spray the Cleaner on the area, scrub with a white 3M doodle bug scrubber and rinse with water.
How much is synthetic teak decking?
Teak Decks on boats are very expensive in both materials and labor. A quick estimate for a custom marine teak deck is $150-175 per square foot for the top end….Synthetic Teak Decking.
| Synthetic Teak Decking Advantages | |
|---|---|
| Ease of installation | Due to flexibility of the 5mm flexible strips |
| Material cost | Real teak is expensive |
What is flexiteek made of?
Flexiteek is a synthetic teak panel (PVC 1st generation), made using REACH compliant phthalate free plasticizer, fully recyclable.
How do you clean PlasDECK?
Use a regular boat brush to spread the cleaner over the deck and allow it to soak in for 5 to 10 minutes, then use the brush. Do not be afraid to apply pressure, it will not hurt the PlasDECK, it will just get down into the texture and deep clean it. Another product, using the same method, is Krud Kutter.
How do you remove blood from SeaDek?
To remove fish blood, use 1 cup bleach to 1 gallon of warm water and soft bristled boat brush. Mix bleach and water take soft bristled brush and dunk in water. In a circular motion clean SeaDek until fish blood is up. Rinse with water.
What is a good alternative to teak?
Overall, you have a number of options when it comes to Teak alternatives and despite all of its advantages, it’s not unmatched. Greenheart is as close as you can get, Ekki is Greenhearts wilder equivalent and Iroko is the go-to if you want timber very similar to Teak but at a much more reasonable price.
Why do yachts use teak wood?
What makes teak such an ideal wood for its use on the water is its high content of silica and oil, which makes teak extremely weather resistant. Its tight grain creates high tensile strength and its characteristics create a resistance to rot, fungi and mildew.
What is synthetic teak?
Synthetic teak : aesthetics and touch feeling More specifically, Flexiteek shows veins and shades that make it, in a natural way, very similar to real wood. Its colour is light biscuit. Plasdeck, too, is. biscuit-colored but its finishes are less processed, which makes it look a little “flatter” and less natural.
Can you sand Plasteak?
It moves too fast and heats the surface of the decking, melting instead of sanding. A 2 inch sanding drum that fits on a battery or corded drill or hand sanding with a sanding block can be used. The sanding must be done in the direction of the grain and 40 grit is recommended.
Is SeaDek hard to keep clean?
SeaDek gives your deck a non-slip surface that is comfortable to stand on and is easy to clean.
How long do teak decks last?
If cared for correctly a teak deck will wear naturally and should not require overhauling for between 10 – 15 years. Our advice is to wash it regularly as you would with any deck with fresh or saltwater using only a soft brush.
Does synthetic teak get hot?
After more than one hour of sun exposure, our teak synthetic panels reached the maximum temperature peak. The Permateek was the hottest one, with a temperature of 60.8 degrees, followed by the Flexiteek with a temperature of 57.3 degres and the Plasdeck with 53.5 degrees.
How do you clean a PlasDECK?
Does SeaDek get moldy?
SeaDek is Easy to Clean. When you are on the water for an extended period, there is no way to prevent your SeaDek from getting wet. As a result, bacteria and mold grow on these surfaces.