How thick is cedar shake siding?
Shakes vs Shingles Shakes are more irregular, and don’t lay as flat when installed. Cedar shake is also thicker than shingle siding, ranging from 1/2″ to 3/4″ or greater at the butt end, while wooden shingles range from about 3/8″ to 1/2″.
Are cedar shakes hard to maintain?
Require More Maintenance The biggest issue with cedar shake siding is the amount of maintenance that it requires. Cedar shakes require regular cleaning to keep them free from things like moss, algae, and mold. They also require surface treatments to protect from things like the elements, moisture, insects, and fire.
Are cedar shakes more expensive?
According to industry statistics, a cedar shake roof is substantially more expensive to install than an asphalt shingle roof, Of course, you need to weigh the pros and cons of owning a beautiful, all-natural, cedar wood roof against the less expensive asphalt shingle option before making a decision.
What is the thickness of a cedar shingle?
Shingles are tapered; the most common type of white cedar shingle is 3/8 inch thick at the butt (the thick end).
What is the difference between #1 and #2 cedar shingles?
#1 shingles are used for both roofing and sidewalls. A #2 shingle is cut the same lenghts and thickness as a #1 shingle. The face must be 10″ clear on the 16″ Fivex; 11″ clear on the 18″ Perfections; and 16″ clear on the 24″ Royals.
How much spacing is needed for cedar shingles?
The basic idea is that the shingles should be installed with 1/4- to 3/8-in spacing between neighbors; this gap is called a “key.” We’re doing a 5-in exposure, which means the bottom 5 in of the the shingle will be visible, while the top 13 in will be under higher courses.
What type of nails are used for cedar shakes?
The Cedar Shake & Shingle Bureau prefers the use of nails, however if you choose to use staples they must be stainless steel Type 316 in locations within fifteen (15) miles of salt water. For locations outside of the salt water zone – stainless steel staples Type 304 or Type 316 must be used.
How many years do cedar shakes last?
30 years
As long as it’s properly installed and with proper maintenance, you can expect to get 30 years of life out of your cedar shake roof. If you invest in quality materials and live in an area with the right conditions, you could possibly get up to 50 years out of it.
Should cedar shakes be sealed?
No. Never seal your cedar roof. Sealing the roof will lock in moisture that would otherwise naturally evaporate during normal weather conditions. Cedar needs to breathe and thus a water repellant type product, rather than a water proofer is the best route to follow.
How long do cedar shakes last?
Do cedar shakes last longer than asphalt shingles?
A dimensional asphalt shingle roof’s lifespan is around 30 years. A cedar shake roof’s lifespan is also 30 years, but you could possibly get up to 50 years if you invest in quality materials and live in an area with the right conditions.
What are the different grades of cedar shakes?
The 3 grades (types) of cedar shake shingles are common, selects, and 100% straight grain.
What size are cedar shakes?
Most common are 18 inch and 24 inch lengths. Butt thickness ranges from 3/8 inch to 1 inch plus (Note: Jumbo resawn shakes have a minimum butt thickness of 1 inch)
What is the best grade of cedar shingle?
Number 1 ~ the highest grade of shingles are 100% heartwood, 100% clear, and 100% edge grain. Western Red Cedar Shingles in this grade are sometimes referred to as “Blue Label”, which is a Registered Certi-label trademark.
How much do you overlap cedar shakes?
The Cedar Shake and Shingle Bureau recommends installation over Type 30 asphalt felt underlayment for red cedar shingles and shakes. Install the felt paper with minimum 6-inch overlaps on vertical joints, 2 inches on horizontal laps, and 4 inches wrapped each way at inside and outside corners.
Do you space cedar shakes?
As a general rule for shingles equilibrated to ambient conditions (about 12% moisture content), shingles should be installed about 1/8 to 1/4 in. (3 to 6 mm) apart whereas shakes should be spaced about 3/8 in.
What fasteners to use for cedar shakes?
Do you have to use stainless nails in cedar?
Use Hot-Dipped Galvanized, Aluminum or Stainless Steel Other types of nails are not recommended. They can rust and disintegrate and react adversely with the natural preservative oils present in cedar resulting in stains and streaks. Copper nails also react with cedar and should not be used.