What is an M42 bandsaw blade?
The MARATHON® M42 is the ultimate economic band saw blade and stands for a broad application spectrum at a consistently high quality. The high-quality features of MARATHON are now even more flexible thanks to the expansion of the product range, for use with smaller diameters and profiles to large full materials.
Where are Starrett band saw blades made?
Starrett-bytewise Columbus, USa Manufactures video and multi-sensor measurement systems. São paulo, braZIL Manufactures hacksaws, jig and reciprocating saw blades, band saw blades, tape measures, and hand tools. mt. airy, USa Manufactures band saw blades, other saw products and precision ground flat stock.
What does HCS mean on blades?
high carbon steel
HCS STANDARD BLADES Our high carbon steel (HCS) standard blades are great for plunge and flush cuts in a wide range of non metallic materials, including softwood, hardwood, particle board, plywood, fiberglass, and nearly all plastics including Plexiglass®.
What is a bimetal bandsaw blade?
Bimetal blades are metal cutting blades. They are used on band saws to cut carbon steel, tool steel, structural steel, stainless steel, pipes and tubes, die steel, angles and flat stock, and mixed metal applications.
What is HCS wood?
High Carbon Steel – the softest of the blade materials. HCS blades are flexible to allow bending without breaking, which also makes them the least durable. They are best suited to cutting softer materials.
Where are Starrett knives made?
Starrett Company has been conducing business out of Athol, Massachusetts for over 140 years.
What does TCT mean on saw blades?
Tungsten Carbide Tips
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
What is a wavy set blade used for?
WAVY SET has teeth set in groups with gradual increasing set to left and right. It is generally made with many teeth per inch and used for cutting thin sections such as sheets, tubes, pipes and small shapes.
How long should a metal bandsaw blade last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
Who owns Starrett tools?
Douglas A Starrett
Starrett Co. purchased Tru-Stone Technologies Inc. in Waite Park, Minnesota, a maker of custom-engineered granite machine bases, for $19.8 million in cash. The current President and CEO of the company is Douglas A Starrett.
What is the three tooth rule?
In order to obtain the best TPI (teeth per inch) for the smoothest cut, follow the three-tooth rule. A minimum of three and a maximum of 24 teeth engaged in a cut. If there are too few teeth in a cut, the blade’s teeth can straddle the work piece and cause the teeth to strip.
How many times can a bandsaw blade be sharpened?
You should typically be able to get two to three sharpenings before you need to change your blade completely.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.