What is the difference between Vallejo Game Air and Model Air?
Vallejo Game Air Game Air is very similar to Model Air, and can be freely mixed with it. The main differences are the selection of colours (brighter and more suitable for fantasy or sci-fi models), and the acrylic resin used as a medium, which is slightly more durable and dries to a particularly matt finish.
Are Vallejo paints good for airbrushing?
Yes, but it depends on the colors. Please consider that Model Air and Premium have been formulated especially for airbrushing, while some colors in Game and Model Color are not suitable for being dispersed in the air, see please points 2.11 and 15. Health and Safety.
What is the difference between Vallejo model and game Color?
What’s the difference between Model Color and Game Color? 👉 Model Color and Panzer Aces are creamy, highly opaque acrylics formulated mostly for brush application. 👉 Game Color has been developed for tabletop games. The formula has a lower viscosity than Model Color and a resin more resistant to frequent handling.
Can Vallejo Model Air be brushed?
Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
Do you need to thin Vallejo air?
Sometimes a little more thinner may be needed depending on the paint and painting situation. If you are marble coating with Vallejo Model Air, you may need to go as much as 70% thinner and 30% paint. With marbling, you probably don’t need Flow Improver in the mix.
How do you use Vallejo air?
Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model.
What is the PSI for Vallejo air?
15 – 20 PSI
For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner. Model Air is not flammable, and does not contain solvents.
How long does Vallejo Model Air take to dry?
In the case of Model Air, the very fine coat applied with an airbrush dries within seconds, so that further coats of paint can be applied immediately. 1.9.
Does Vallejo air need thinning?
How do you use Vallejo Model Air?
Can you hand brush Vallejo Model Air?
The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush.
Are Vallejo paints good for brush painting?
Vallejo paints (white cap) are very good for brushpainting, but in my experience are very poor when it comes to airbrushing. I may not have used the right thinner for that though, but as James says – the Model Air range is prethinned for airbrushing straight from the bottle.
Can you thin acrylic paint with water for airbrushing?
Can you use water to thin acrylic paint for airbrushing? Yes, simply mix a 1:1 ratio of water and acrylic paint. Mix well by adding the mixture to a container with a lid and shake vigorously for a minute or two. You can also place the mixture in a measuring jug and mix with a mini whisk.
Does Vallejo Model Air need to be thinned?
Sometimes a little more thinner may be needed depending on the paint and painting situation. If you are marble coating with Vallejo Model Air, you may need to go as much as 70% thinner and 30% paint.