Are wood fireplace inserts worth it?
Studies have shown that as much as 95 percent of the residual heat in a traditional wood fireplace is expelled outside. A wood-burning fireplace insert offers a slower, more efficient burn rate providing up to five hours of uninterrupted heat. It consumes less fuel and has heating efficiencies of 80+ percent!
How much do fireplace inserts cost?
Table of Contents
| Average Gas Fireplace Insert Cost | |
|---|---|
| Average Cost | $2,000 |
| Highest Cost | $6,000+ |
| Lowest Cost | $1,000 |
What is a zero clearance fireplace?
Zero-clearance fireplaces are pre-manufactured fireplaces that can be installed almost directly against combustible materials like wood, walls, or paneling. The construction and materials of the firebox do not allow the outside temperatures of the firebox to affect those materials and do not require a hearth.
Can you add fireplace to existing home?
Be assured that it is possible to add a fireplace to an existing home. You’ll just need to determine which one will work best. Get familiar with your area’s building codes to check requirements such as minimum clearances around vent pipes and limits on fireplace emissions.
How long do wood fireplace inserts last?
A wood-burning fireplace insert needs to last a minimum of 10 years, and it will experience considerable heat stress.
What is the difference between a fireplace and a fireplace insert?
Inserts are much smaller than fireplaces again because they are designed to fit into the opening, they will have much smaller glass fronts for the same reason. Inserts are designed to replace the inefficient wood fireplaces with new, cleaner burning appliances inside of them.
How much does it cost to install a zero clearance fireplace?
If your room is small, a large masonry unit won’t work, but a prefabricated metal zero-clearance fireplace takes a minimum amount of space and can be safely placed near wood framing. A contractor will charge $2,587 to install a prefabricated zero-clearance fireplace and chimney. This includes the labor and material.
How much does it cost to add a wood burning fireplace to a house?
If you’re installing a wood-burning fireplace insert, you’ll pay between $700 and $6,500. But if you’re constructing and installing a wood-burning fireplace from scratch, you could pay upwards of $30,000. Higher numbers are more likely if you need foundation work to hold up the weight of a new fireplace.
Should I put an insert in my fireplace?
Installing a fireplace insert is ideal when you have an existing fireplace of some sort. It is a less expensive option when compared to renovation or replacement. Inserts replace the inefficient wood-burning system of an open masonry fireplace and vent through an existing chimney.
What is the difference between a zero clearance fireplace and a masonry fireplace?
While brick and ceramic are the most common materials used for the internal, or working, components of a masonry fireplace, the face material can also include stone, marble, granite, travertine and tile. Zero Clearance (or ZC) fireplaces are pre-manufactured metal fireboxes with coinciding metal flue pipe.