How do I log into my Cisco SPA122?

How do I log into my Cisco SPA122?

Procedure

1. Using a LAN/Ethernet cable, connect the computer to the yellow Ethernet (LAN) port of the SPA122.
2. Open Internet Explorer browser (IE is required to ensure the adapter’s configuration page displays properly).
3. Log in: admin / (administrator password)
4. Click Voice > Provisioning.
5. Click Submit.

How do I access Cisco ATA?

Enter the old password (“admin”) and then enter the new password. From a factory default baseline on a Cisco 192 ATA device, plug an Ethernet cable into to the Ethernet slot of the device. Enter this IP address into your browser 192.168. 15.1 to be prompted for login.

How do I factory reset my Cisco SPA122?

To reset the SPA122 to factory defaults follow these steps:

1. Plug in power adapter.
2. Plug in a phone to ‘Phone 1′ port of the SPA122.
3. Dial ****
4. You should hear ‘Configuration Option Menu’
5. Dial 73738# (RESET#)
6. Press 1 to confirm the reset.

What is network Configuration Utility?

The Network Configuration Utility (NCU) configures a system’s Network Interface Card (NIC), TCP/IP settings, and domain information for use in Recovery Environment. Note: The PE Network Manager provides a comprehensive set of network options. However, most Recovery Environment scenarios work with the default settings.

How do I access SPA112?

How to access the web configuration utility on the Cisco SPA112

1. Open a web browser and enter the IP address of the phone adapter in the address bar, then press Enter.
2. Enter the username of the device in the Username field.
3. Enter the password of the device in the Password field.

How do I reset my Cisco ATA to factory settings?

Dial the following IVR code using the phone keypad: 73738 (RESET) followed by the # key. The IVR will ask you to confirm by pressing the 1 on the phone keypad. You must hang-up the phone to commence the reboot sequence.

What is poly configuration utility default password?

: 456
The default Administrator password is: 456. The default User password is: 123. These passwords can be changed in the utility itself. The Web Configuration Utility Home screen is displayed.

How do I open network interface configuration utility?

Click Network Configuration in the Tools menu to open the utility. Select the appropriate Ethernet adapter from the dropdown list. If necessary, select the adapter’s preferred link speed and specify its MAC address.

How do I connect my ATA adapter?

Step 1 Connect the network cable to your network and to the NETWORK port on the ATA. Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine). If connecting a fax machine, connect it directly to the ATA.

How do I configure ATA 192?

Cisco ATA 191 and ATA 192

1. Plug the ATA into your local network from the Network port.
2. Plug a computer into the ethernet port of the ATA 192.
3. Navigate to 192.168. 15.1 (By default this device is routing and has DHCP on for connections with the Ethernet port.
4. Log in using admin/admin.

What is an ATA port?

An analog telephone adapter (ATA) is a device for connecting traditional analog telephones, fax machines, and similar customer-premises devices to a digital telephone system or a voice over IP telephony network.

How do I find the IP address of my vvx250?

Accessing the Poly VVX 250/350/450 Web Configuration Utility

1. Press to access the Main Menu Screen and navigate to Settings.
2. Select Status > Platform > Phone.
3. Scroll down to see the IP address.