What is the default IP for APC Network Management Card?
The default IP address is 192.168. 2.66 with a subnet mask of 255.255. 255.0. The default username is admin and the default password is admin01.
How do I set up APC UPS?
Connect to the UPS/device serial port using the correct APC configuration cable….9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
- Apply the port settings to establish the connection.
- Press enter 3-5 times to display the username prompt.
- Use the default username and password of “apc”.
How do I upgrade my APC NMC firmware?
APC UPS – Upgrading the Firmware
- Access the APC website support area and download the lastest version of firmware to your Network Management Interface.
- Extract and start the firmware upgrade utility.
- Enter the IP address of your UPS, enter the APC username and it’s password.
How do I reset my APC Network Management Card?
1.) Hold down the Reset button for 20-25 seconds, ensuring the Status LED is pulsing green during this time. 2.) When the Status LED change to amber or orange, release the Reset button to allow the NMC to complete its reboot process.
How do I find the IP address of my APC UPS?
On the LCD menu, access the About menu. On the About menu, select the SmartSlot Card option. Locate and access the IP address option. In our example, the LCD menu shows the APC UPS IP address 10.10.
What port does APC UPS use?
The Agent interface utilizes port 6547.
How do I reset my ap9631 network management card?
Hold the reset button for 5-7 seconds. Resets only the password. Hold the reset button for 20 seconds. This will restore the card to factory default settings including switching back to DHCP mode.
How do I find my APC UPS IP address?
What is the APC SmartConnect Ethernet port?
The dedicated SmartConnect Ethernet Port makes set up easy; it requires no additional hardware or software. APC’s next-generation Smart-UPS enables you to monitor your power infrastructure online, anytime – anywhere – from our secure web portal.
What is SmartConnect Ethernet port?
APC SmartConnect – a feature which allows you to view the status of your UPS through a secure web portal. Through this innovative remote monitoring interface, you’ll receive automatic notifications, firmware updates, and advanced support.
How do I assign an IP address to APC UPS?
Tutorial APC UPS – Initial IP address configuration
- • Configuration > Network > TCP/IP > IPV4 Settings.
- Configure the desired static IP address an click on the Apply button.
- After finishing the IP address configuration, you need to restart the network management interface for the new IP address to be accepted.
How do I find my APC UPS IP?
How do I enable Smart Connect on APC UPS?
Getting started is easy..
- Install your UPS. Install a next-generation Smart-UPS at your business site.
- Scan the QR code. Scan the QR Code printed onto your Smart-UPS to automatically begin registration via the web portal.
- Register your UPS. Create a Schneider Electric account for your business.
What is APC SmartConnect port?
What’s the difference between UPS and APS?
APS—>(Access Power Solution)…the APS have the same function as the UPS, but with a litle difference which i want to know , some electric machines work on ups but on APS they dont (such as the electrical fan).