# Which is not the application of monostable multivibrator?

## Which is not the application of monostable multivibrator?

Table of Contents

Explanation: A Schmitt trigger circuit is a comparator circuit, also called a regenerative comparator. It converts any waveform into a square wave. It is not a monostable multivibrator, unlike the other three options.

### What are the applications of bistable multivibrator?

Application of Bistable Multivibrator

• These are some applications of the bistable multivibrator.
• It used in different storage devices and for counting of binary numbers.
• For frequency division in different circuits.
• It used for the production of different clock pulses.
• It used for different relay controller.

#### What are the advantages of monostable multivibrator?

Advantage of Monostable Multivibrator It needs only one single pulse to start its operation there is no need of extra pulse for its operation. Its construction is very simple and can be constructed easily. Due to simple construction its price is also less.

What is difference between monostable and bistable?

Monostable – A one-shot multivibrator that has only ONE stable state as once externally triggered it returns back to its first stable state. Bistable – A flip-flop that has TWO stable states producing a single pulse either HIGH or LOW in value.

What is the principle of a monostable multivibrator?

Monostable Multivibrators. In a monostable multivibrator, one of the state is absolutely permanent i.e, stable and the other one is temporary i.e, quasi-stable. When an external trigger pulse is applied to the mono-stable at appropriate point, the mono-stable changes it state from stabe state to quasi-stable state.

## Which mode can be used as monostable multivibrator?

The following figure is the schematic of IC 555 as a Monostable Multivibrator. This is the basic mode of operation of the IC 555. It requires only two extra components to make it work as a monostable multivibrator: a resistor and a capacitor. As the name specifies, a monostable multivibrator has only one stable state.

### What is the application of astable multivibrator in daily life?

Applications astable multivibrator As a timing oscillator or clock of a computer system. It is also used for a flashing lights, switching and power supply circuits.

#### What is monostable mode?

Monostable multivibrator (MMV) mode of 555 timer IC is also called Single shot mode. As the name indicates, only one state is stable and the other one is called unstable or quasi stable state. 555 timer IC remains in Stable state until the external triggering is applied.

What is a characteristic of a monostable multivibrator?

What is a characteristic of a monostable multivibrator? It switches momentarily to the opposite binary state and then returns, after a set time, to its original state.

What is time period for monostable multivibrator?

In monostable multivibrator there is one stable state and one astable state. This multivibrator need a trigger (external signal) to enter into the astable state and get back to the stable state after some time period. The time period will be set by the user, the monostable multivibrator is mainly used as timer.

## How do you make a monostable multivibrator?

Construction of Monostable Multivibrator The base Q1 is connected to the collector of Q2 through the resistor R2 and capacitor C. Another dc supply voltage –VBB is given to the base of transistor Q1 through the resistor R3. The trigger pulse is given to the base of Q1 through the capacitor C2 to change its state.

### Where do we use multivibrator?

Astable Multivibrators finds its applications in delay and timing circuits and in transmission and reception of radio signals. Monostable multivibrators are majorly used in analog systems in order to control the frequency of the signal at the output.