Is optical cable and SPDIF the same?
They are both digital connections. Optical usually refers to the ADAT protocol over a fiber optic cable (TOSLINK), while SPDIF is usually transmitted over a coaxial “RCA” cable. “Usually”, optical can carry 8 channels at 44.1/48KHz (or 4 at 88.2/96KHz in certain situations) while SPDIF is stereo (two channels).
What is a 3.5 mm to 3.5 mm cable used for?
Consumer electronics devices such as digital cameras, camcorders, and portable DVD players use 3.5 mm connectors for composite video and audio output. Typically, a TRS connection is used for mono unbalanced audio plus video, and a TRRS connection for stereo unbalanced audio plus video.
Is TOSLINK the same as 3.5 mm?
A compact jack that has the same form factor as a mini jack (3.5mm/1/8″), and that may be used for either stereo or balanced analog or optical (TOSLink-format) connections. Mini-TOSLink jacks have a longer tip featuring a fiber-optic LED at the end (bottom) of the jack.
Can 3.5 mm convert to optical?
You need to buy an active converter to take the analog(3.5mm) to digital(optical). There are plenty on Amazon.
Does SPDIF require a special cable?
SPDIF cables have a stereo digital connection, whereas RCA cables have a mono analog connection. There are no SPDIF to RCA cables, so you would need an RCA to S/PDIF converter to achieve that.
What are 3.5 mm cables most commonly used for?
3.5 mm jack cable: jack cables – usually with 3.5 mm plugs – transmit analogue mono or stereo signals in home audio. Jack cables can also carry microphone signals and other external signals. The corresponding inputs to the sound card are usually called line-in, the headphone jacks are called line-out.
Can I use mini TOSLINK on 3.5 mm jack?
Kindly be advised that the optical 3.5mm connector mini TOSLINK cables are made for specific devices that has a Mini Toslink or a 3.5mm OPTICAL port only. It does not look like the Edifier Luna has this connection. The cable will not be compatible.
What type of cables are used for SPDIF?
The SPDIF interface can be used by two different types of digital cable: TOSLINK and coaxial. Coaxial cables conduct digital data by means of electronic impulses from source devices like CD and DVD players to amplifiers or receivers. TOSLINK, on the other hand, uses optical signals to send digital audio data.
Can you use a normal RCA cable for SPDIF?
You cannot use RCA cables for S/PDIF connections. While they look similar because of the RCA connector (Phono Plug),it is not the same. SPDIF cables have a stereo digital connection, whereas RCA cables have a mono analog connection.
Can you plug 3.5 mm to RCA?
Yes you can. You will need an adapter to go from the included 3.5mm audio cable. It will be a female 3.5mm to two male RCA plugs. You can pick these up at any audio supply store.
Can I connect headphones to SPDIF?
SPDIF is digital, and will not connect directly to headphones of basically any kind. It is for connecting the computer to a separate receiver or amplifier, rather than directly to a listening device.